Drtiz_Make Something

Facebook Twitter Sew4Home RSS Feed Follow Me on Pinterest

Sew4Home

Noel Home: Comfy PJ Pants for the Whole Family

Printer-friendly versionSend by emailPDF version

Click to Enlarge

Our thanks to our creative friends at our Signature Sponsor, Janome for sharing this project with us. It was created last year for a special New Sewists Series they put together, and the instructions show you how to make pajama pants without a pattern; simply grab your favorite current pair and use them as a template. We added a jazzy bottom accent cuff to ours so we could mix and match our beautiful Michael Miller Bonnes Amies fabrics. This is a perfect project for beginners: super fast, easy and instantly gratifying. We thought it would be great fun to surprise the whole family on Christmas morning with matching PJ pants. I recruited one of the cutest families I know to be our models, and the rest is dreamy history.

Our thanks to the great folks at Michael Miller Fabrics for providing the Bonnes Amies fabric we used for our four pairs of PJ pants. This is a fairly new collection, but is available now in many stores and online outlets, such as from our friends at Fat Quarter Shop. We also found it online at Hancock's of Paducah. The colorways and patterns are not only great for a project such as this, but would also be spectacular for spring sewing, which will be here before we know it!

Sewing Tools You Need

Fabric and Other Supplies

Click to Enlarge

Amounts are for ONE pair of average adult jammie pants

  • 2½ yards of 44-45" wide fabric for the main pant
  • ½ yard 44-45" wide fabric for the drawstring tie and the contrasting cuff
    Our fabric combinations in Bonnes Amies for Michael Miller Fabrics were as follows:
    Mom's Pants: Marseille Pierre pant with Marseille Jacques accent
    Dad's Pants: Marseille Slim Stripe pant with Marseille Jacques accent (cut as a slightly different point in the stripe than Mom's accent in the same fabric)
    Son's Pants: Marseille Picnic pant with Marseille Slim Stripe accent
    Daughter's Pants: Marseille Gaston pant with Marseille Petit Point accent
  • All purpose thread in colors to match fabrics
  • Wrapping paper, old newspaper, or other large paper for pattern
  • Safety pin
  • A pair of old pajama pants that fit comfortably
  • See-through ruler
  • Long ruler or yardstick
  • Fabric pencil
  • Iron and ironing board
  • Scissors or rotary cutter and mat
  • Straight pins

Getting Started

We used Dad's pants as our sample for these instructions.

The main pant pattern

  1. Locate a pair of pajama pants that fit you or the intended recipient of the new jammie pants. A loose-fitting, comfy pair is best.
  2. Fold the pants in half, so the crotch seam is fully extended and the pants are as flat as possible. Press if necessary.
  3. Unroll a length of wrapping paper, butcher paper or other large paper on the floor. You need a piece bigger than your folded pants.
  4. Place the pants on the paper and trace around the entire perimeter.
    Click to Enlarge

Adapting the traced pattern to create the final cut line and cuff pattern

  1. After the pattern is traced around the original jammie pants, you need to determine the depth of the cuff.
  2. There are a couple different methods to determine this depth. You can look at the overall length and, with your tape measurer, decide the measurement that looks proportionate. Or, like us, because we used a striped fabric, you can choose a dominant repeat to determine the depth. For our Bonnes Amies Marseille Jacques fabric, the appropriate depth was 4½" (this is the depth without the seam allowance; we'll add that later).
  3. Draw a line parallel to the bottom of the pant leg, at the same depth as the finished cuff. In our sample, that meant we drew a line 4½" UP from the bottom edge of the original traced pattern.
    Click to Enlarge
  4. Cut off the pant pattern along this new line.
  5. Now you need to make the pattern for the cuff. Our cuffs are doubled and sewn to the bottom of the pants for a nice, neat folded edge along the bottom.
  6. Place a new piece of paper over your existing pattern and trace the bottom of the pant. You only need to trace a section just a bit larger than your finished cuff depth.
  7. Carefully trace, drawing a dashed line at the very bottom, and tracing up both sides by the depth of the cuff (4½" in our sample). The dashed line will be the folded bottom of the cuff.
  8. Remove the new paper from the existing pattern. Draw a new line parallel to the dashed line, at the same depth as the finished cuff. In our sample, that meant we drew a new line 4½" from the dashed line.
    NOTE: Depending on your original jammie pant shape, the sides of the leg may taper in a little. In that case, erase your original traced side lines and connect the two parallel lines with straight lines (to the fold line and continuing for the second half of the cuff). This will make the bottom of the pant a nice, straight cut.
  9. Cut out the rectangle you've just drawn.
  10. Place this rectangle on a new piece of blank paper, trace it, then flip it over and trace the opposite side. The middle of this new, double-in-size rectangle should still be indicated with a dashed line. Again, this dashed line is the bottom of the cuff and will be helpful for placement when fussy cutting the fabric.
    Click to Enlarge
  11. Add a ½" seam allowance on the side, at the top and bottom.
    NOTE: We suggest writing on your pattern where you will 'cut on the fold,' and which sides are the outside of the pant leg, the top and the bottom. This may not be important if you are using a solid fabric or a very randomly patterned fabric, but it was especially important to us because we wanted our stripe on the top portion of the cut to be fussy cut at a very particular point on our striped fabric.
    Click to Enlarge
  12. Cut out the final cuff pattern piece.
  13. Remember your original pant leg pattern. Go get it again, and using your long ruler, or yardstick make a second line ½" from the traced line on the curved side of the pants, and 2" from the traced line at the top. This second line is where you'll CUT your fabric, and accounts for the seam and hem allowances you will need. You do NOT create a second line along the long straight edge of the pants; that is the fold.
    Click to Enlarge
    NOTE: The very top inside corner of the pattern should angle out about ½" to account for how the drawstring casing will fold down.
    Diagram

Cut out your fabric pieces with your final patterns

  1. Fold your main pant fabric in half lengthwise. You'll have a long, narrow folded piece from which you'll cut your two pant leg pieces.
  2. Place the straight side of the pant leg pattern along the fold of the fabric and pin in place.
    Click to Enlarge
  3. Cut around the pattern piece.
  4. Slide your pattern piece down the folded fabric and place the long straight edge along the fold of the fabric again and pin in place. Cut out a second leg around the pattern piece.
  5. Follow these same steps to cut two cuffs from the accent fabric, fussy cutting as needed for your fabric.
    Click to Enlarge

At Your Sewing Machine & Ironing Board

Attach cuffs to pant legs

  1. Fold each cuff piece in half lengthwise (at the dotted line so to speak), WRONG sides together.
  2. Pin the cuff to the right side of the bottom pant leg. Be sure you have the top side of the cuff right side together with pant leg. Then, when it flips down upon completion of the seam, the right side will be facing out.
    Click to Enlarge
  3. Using a ½" seam allowance, sew the cuff to the pant leg. Finish the raw edges with a serger, overcast stitch on your sewing machine, or a pinking shears.
  4. Press the seam open.
    Click to Enlarge
  5. Repeat to attach the remaining cuff to the remaining pant leg.

Create the pants

  1. Each pattern piece corresponds to one leg of the jammie pants. In the next steps, you will sew each leg closed, then sew the two legs together.
    NOTE: Because jammie pants are laundered often, we recommend finished the raw edges of the seam allowances. If you are new to this we have some finishing recommendations in an earlier tutorial. It is best to finish raw edges PRIOR to construction unless you are using a serger.
  2. First, sew the leg sections closed. Fold one pant leg piece in half (fold is along the long straight edge) right sides together.
  3. Starting at the bottom, or cuff of the pants, pin along the inside, curved edge, ending at the outermost section of the crotch.
    Diagram
  4. Using ½" seam allowance, sew from the cuff to the crotch, removing pins as you go.
  5. Press the seam open.
    Diagram
  6. Repeat with the second leg.
  7. At this point, you have two leg sections. Now you need to stitch them together. The best way to do this is to turn one of the leg pieces right side out and leave the other wrong side out. Place the leg piece with the fabric right side out inside the wrong side out leg. This means the two pieces are now right sides together. Match up the seams you just sewed as well as all the raw edges of the crotch line. Pin together.
    Diagram
  8. Stitch the two pieces together, following the "U" shape, removing pins as you go.
    NOTE: If you are using a serger, you can also finish the raw edges along the top of waist.
  9. Turn the finished pants right side out.

Create the drawstring casing

  1. Fold the top of the waist down ½" and press. Fold down an additional 1½", press and pin in place.
    NOTE: If you are using a serger, you only need to fold down once to 2".
  2. If possible, have the person who will wear these pants try them on at this time, to make sure the fit is comfortable. Be especially careful of the pins. Adjust the waist if necessary. Take out the pins and unfold the casing so the top edge of the waist is either the initial ½" folded edge or a serged edge.
  3. Now, you will use the buttonhole function of your machine to create two buttonholes for the drawstring.
  4. Find the center seam on the front of the pants. Measure ½" from either side of the center seam. Measure 1-5/8" from the top of the pants and place a mark, then measure 7/8" from the top of the pants and place a mark. Use the diagram below for reference. This will be the top and bottom points of your vertical buttonholes. If you needed to adjust the waistline in the fitting, you may need to adjust the location of your button holes slightly. The buttonholes should be approximately ¾" long, and centered in what will be the top hem of the pants.
    Diagram
  5. Refer to your machine's manual for exact instructions on using your machine's buttonholing function. You may have a one step automatic buttonhole, or you may have a four step buttonhole. Either way, you can use a ½" button to create a perfectly sized buttonhole for this particular project. Create a buttonhole on each side of the center seam following your marks. If you are new to buttonholes, check out our tutorial: How To Make A Buttonhole.
  6. Refold the top casing back in place, and using a 1/4" - 3/8" seam allowance, stitch the cashing in place, staying close to the inside folded edge.

Create the drawstring

  1. Measure the width of the pants at the waist. Double this number and add 24". This will be the length of drawstring necessary for your pants. Cut enough 3" wide strips from your accent fabric to equal this number, remembering to account for the seam allowances when the strips are sewn end to end. Extra is better than too little.
  2. Stitch the strips together along the short ends. Trim if necessary to create one long strip the length you determined.
    Diagram
  3. Fold the strip in half along the long edge, and press.
    Diagram
  4. Open the strip.
    Diagram
  5. Fold one edge of the strip into the center, so the edge of the strip is parallel to the pressed center line. Press.
  6. Repeat for the other edge of the strip, and press in place.
    Diagram
  7. Fold the strip along the center line once more, and press.  You have now folded the strip into quarters.
    Diagram
  8. Tuck in the raw edges of both ends for a clean finish. With matching or contrasting thread, edgestitch along the open side of the strip and across both ends.
    Diagram
  9. Place a safety pin through one end of the drawstring.
  10. Push the safety pin through the buttonhole, and use it to work the drawstring through the pants so the safety pin emerges from the other buttonhole.
    NOTE: For faster construction, you can skip the drawstring step and use ribbon or cording instead.

Contributors

Project Concept and Preliminary Instructions: Alison Newman, Janome America

Fabric Combination and Cuff Design: Alicia Thommas

Sample Creation and Instructional Outline: Jodi Kelly

Other machines suitable for this project include the Elna Sew Fun and the Pfaff hobby 1132.

Tags: 

Section: 

Comments (43)

OhioWaterLily said:
OhioWaterLily's picture

I love this tutorial ; a great family gift idea. Also, I am very tall and lounging pants are super expensive for a woman's 36" inseam. Looking forward to giving this a shot.

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

Thanks for the link - glad you enjoyed the project!

Longhorn5739 said:
Longhorn5739's picture

Any advice on adding a button fly to these pants?

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ Longhorn5739 - Garments are not our main specialty here, so we don't currently have a tutorial on the button fly. However, I'm sure a search of Google or YouTube will yeild a number of good options. 

Stacy said:
Stacy's picture

Just a question to confirm something.  When you lay the pattern on the fabric to cut, is the fabric folded with the correct side facing out and the wrong sides touching?

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ Stacy - you can fold wrong sides together or right sides together - as long as you are consistent with both pieces (the front and the back). We cut wrong sides together (right side out) so we could best see our strips while cutting and insure they were straight.

Katie said:
Katie 's picture

I just made these this morning and they turned out great!!  It only took about an hour and a half, including cutting time and time to learn (finally!) how to use my machine's buttonhole foot.  I'm sure I'll be making more, and I know they will go much faster!

Thanks for the great tutorial!

Claire- SITS said:
Claire- SITS's picture

I love the idea and your fabric choice.  What a great idea for Christmas morning!

abccornaby said:
abccornaby's picture

My teenage daughter would prefer shorts would the concept be the same just adjust the length or am I making this too simple. I am a beginner sewer.

KimG1967 said:
KimG1967's picture

Question regarding making the drawstring casing ... when folding the waist to make the casing, you're folding down INSIDE the pants, with the pants right side out, correct? Otherwise, the wrong side of the fabric will show as the casing?

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ KimG1967 - yes, casing to the inside.

Anonymous said:
Anonymous's picture

i would love to make matching pairs for a family of five For Xmas gift this year. BUT without asking them for a pair of pj pants to trace fom (& get size) kinda defeats the purpose. Any suggestions?  Thank you!,,,,,,

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

Sorry - this one is all about starting with a old pair to make a new pair. Without the old pair to start with, your best bet is to find a commercial pattern for PJ pants.

Marlene Waldrop said:
Marlene Waldrop's picture

I've been sewing about 30 years or so. My addition would be this: if you'll sew that front seams together, and the back seam together, then pin the pieces at the crotch to match your seamline, and pin down each leg, then you can sew the piece in one long seam from leg to leg forming the inside seam. I always thought this was quicker. And secondly, I use grosgrain ribbon for the tie, stitching it in the center back after putting it in, so it doesn't slip out. I love being able to make everyone in the family jammie pants!! Thanks for the pattern, I'm going to make matching color Christmas patterns for the kids and grandkids and wrap for them to open on Dec. 1st!!

Diane Martin said:
Diane Martin's picture

I still give my 35 year old daughter her Christmas PJs on the morning of St. Nicholas day (Dec.6th, the date children traditionally left out their shoes to wake to have them filled with treats.  I have a woven straw shoe I use each year.  I love tradition.)  My Mom always gave us a present to open Christmas Eve and it was our pajamas so we would have them on for pictures in the morning.

M.E. said:
M.E.'s picture

Thank you Marlene for your extremely helpful hints! 

Leyna said:
Leyna's picture

I just finished making these PJ pants. THANK YOU for a very clear, easy to follow tutorial! They came out great! 

mini_mum said:
mini_mum's picture
LOVE these!

Now all I need is a simple & straight forward pattern for a PJ top to go with these smilies/smiley.gifsmilies/grin.gif
Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture
@ KB - Thanks for letting us know how the project turned out for you. It's great for us and others to hear about other success stories. Different fabrics certainly make for different results. smilies/wink.gif
KB said:
KB's picture
I made these pajamas yesterday and had a couple of thoughts. First, I didn't find that the 1/2 yard of fabric was enough for the trim/tie. Perhaps it was because I used a stripe? In the future, I would get 3/4 to a yard. Second, I used a pair of pajamas as my template that were made from a cotton knit fabric, which I discovered made my pajamas too small to wear. It's okay, I needed to lose 10 pounds anyway! Great tutorial that made my first sewing venture possible. smilies/smiley.gif
midwife laura said:
midwife laura's picture
I buy sheets from goodwill and thrift stores, they make great pajama pants
Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture
@ SewLindsaySew -- HA! Glad you are having fun!
Lakshmi said:
Lakshmi's picture
I have just sewn this and tried on. Very comfy. Thanks a ton for sharing this. Going to sew for my kid and husband too.
NewSew said:
NewSew's picture
Hi

Thanks for this pattern-im 27- and have bought my first sewing machine. Im so excited by what i've made here tonight.

Thanks again!
Sheri@childmade.com said:
Sheri@childmade.com's picture
These look so comfy! I love the coordinated fabrics. Thanks for sharing!
Manjula said:
Manjula's picture
Wow..love this..Cant wait to make a couple for my husband..I know he will love it.
Thank you
Gemma said:
Gemma's picture
Thank you for the information! I do enjoy the projects offered here and thought you were a division of Janome. I will check back in both places for great ideas smilies/smiley.gif
Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture
Hi Gemma -- Janome is a separate company from Sew4Home, so although I remember the promotion they had, I don't know what is still online or in a special section on their janome.com website. That said, I think your daughter would be able to find a lot of great stuff here that will help her as a beginning sewist. That is what our site is all about --- getting new folks interested in sewing! Have her browser around a bit and I think she'll find a number of projects as well as technique tutorials that will get her going.
Gemma said:
Gemma's picture
How do you access the New Sewists Series? Is it a special section?
My daughter is learning to sew and is excited about these pajama
pants! We were wondering what else is available in the series.

Thank you!
Bev said:
Bev's picture
Wonderful! So glad you offered this to us. I made two pairs for my grandkids for Christmas. Then three more family members complained that THEY hadn't received a pair. So here I go again! Easy to make in no time at all. Plus, lucky me, I have lots of flannel fabric bought on sale before the holiday season.
Thanks again. Love this site, I've used it so much.
ccinrf said:
ccinrf's picture
I just made flannel PJ's for 10 grandkids, spanning five sizes. I thought it was worthwhile to get five 99-cent patterns when they went on sale. But your instructions and pictures are great.
Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture
Hi Kelly - glad you like the project. There is a print option. Scroll back up to the very top of the page by the title, you'll see the print option and the email option.
Kelly aka HonestNiceWoman said:
Kelly aka HonestNiceWoman's picture
I will definitely be making these. I've been looking at this post for a couple days now. Thank you for positing this tutorial. My daughter and son's girlfriend are always rolling the tops of their pjs down, so now I will be able to make a pattern that fits them properly. My Guy has taken over one pair of my pjs so now I need to find some nice quality fleece and make him several pairs - and a couple more for me too! Thanks again!

I'm curious why there is no PRINT OPTION for your post? I have a similar "share this" icon but with many more options and one is a print option in the pop up box. I was able to paste your URL into www.printfriendly.com and print it out that way. Hope that tip will help others. I use it often.
Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture
Hi Savitar -- the whole idea with these is that you don't have to buy a pattern smilies/cheesy.gif. Beyond breaking-and-entering, perhaps there is someone in your family who is similar in size to the gift recipient? If so, use that person's pants as a template. If not, there are tons of retail patterns out there to buy for this type of pant.
Savitar said:
Savitar's picture
If you want to make these as a gift, what's the option short of stealing into someone's house and taking existing PJs? I was hoping for a pattern that could be used without drafting your own from existing pants.

Add new comment

*Sew4Home reserves the right to restrict comments that don’t relate to the article, contain profanity, personal attacks or promote personal or other business.
By submitting this form, you accept the Mollom privacy policy.