As more and more stores up their recycling commitment (some entire cities have banned plastic bags), it's becoming pretty common to have to bring your own shopping bags. Fabric bags are the go-to alternative and widely available, particularly the heavier, structured bags. Lightweight, flexible bags that would best replace plastic can be harder to come by. Luckily, you're a clever sewing person and can make your own... with a little help from your friends at Sew4Home.
These bags are made from two layers of quilting weight cotton with just a bit of batting in the base. As the name implies, they're meant to be wonderfully soft and stuffable.
We chose three different coordinating florals for our sample bags, alternating the fabrics to create the exterior and lining sets. We love the fresh colors, which are sure to make shopping more fun.
Roll up or even wad up the bag to fit one or more into your purse, the glove box or your bike bag. Will it wrinkle? Yep. But it smooths out as soon as you load it up, and if you're worried about wrinkles in your shopping totes... well, we really can't help you with that!
Two layers of cotton are quite strong, and these bags can hold a lot... more than a plastic bag for sure! The single strap, which is adjustable, keeps them well-balanced and easy to carry. Load up at the grocery store and farmer's market. Or use one as the perfect lightweight tote for a lazy afternoon in the park.
Our simple design is super fast and easy. You could whip up several in a single afternoon for yourself – or how adorable would these be as a wedding shower gift in the bride's favorite colors?! We offer a multi-part pattern download below.
The shoulder straps knot at the top so they're easy to adjust. A shortened strap will make it easier to carry a heavy load.
If you like this bag design, you may also like our other on-the-go shopping bag alternatives:
Each shopping bag finishes at approximately 12" wide x 6" deep x 20" tall from small top knot to base. The strap is adjustable with a simple knot.
Sewing Tools You Need
- Sewing Machine and standard presser foot
Fabric and Other Supplies
- 1 yard EACH of TWO 44" + quilting weight fabrics for the bag exterior and lining (each takes a full yard - see the diagrams below for our recommended cutting plan); we mixed and matched a selection of three pretty floral cuts from our Sew4Home stash – all from collections by Fig Tree Quilts for Moda Fabrics:
Poppy Floral Swirls in Creme from the Somerset collection
Autumn Rose in Ivory from the Honeysweet collection
Goji Berries in Citrus from the Aloha Girl collection
- Scrap or ¼ yard of low loft batting for the base
- ONE package of ½" bias tape; we used Wrights Extra Wide Double Fold Bias Binding in Ivory
- All purpose thread to match fabric
- See-through ruler
- Fabric pen or pencil
- Iron and ironing board
- Rotary cutter and mat
- Tape measure
- Seam gauge
- Seam ripper
- Straight pins
- Download and print the FIVE pattern pieces: Shopping Tote Pattern Piece 1, Shopping Tote Pattern Piece 2, Shopping Tote Pattern Pieces 3 and 4 (two pattern pieces will print on one sheet), and Shopping Tote Pattern Base.
IMPORTANT: Each pattern download is ONE 8½" x 11" sheet. You must print the PDF files at 100%. DO NOT SCALE to fit the page. There is a guide line on each page so you can confirm your final printout is to scale.
- Cut out each pattern along the solid line. Assemble the four pieces that make up the full body of the bag, aligning the guide arrows on each piece.
- From the fabric for the exterior, cut TWO from the assembled body pattern and ONE from the base pattern.
- When cutting on the fold, to make the best use of the one yard of fabric, first place the fabric right side up and flat on your work surface with the 44-45" width along the top and bottom and the 36" length along the sides. Fold in each side about 10" toward the center. You are folding in the raw edge just enough to fit the pattern. Do not cut down the center of the fabric.
- Pin and cut one piece from the right folded edge.
- Then pin and cut a second piece from the left folded edge. As you can see in the illustrations above and below, you will cut one with the pattern right side up, then flip the assembled pattern to cut the other.
- Unfold the fabric to reveal the remaining fabric at the center. Use this section to cut the one base rectangle.
NOTE: If you'd rather not cut on the fold, you can print TWO SETS of the pattern pieces. Assemble both sets of four, then flip one set to the wrong side and butt together the two assembled units along the center edge – the edge that would have been used to cut on the fold. As above, butt together and tape; do not overlap. Do the same for the base, but you are just working with two pieces, one right side up and one wrong side up, aligned at the center fold line. This is what we did to cut our base as shown in the illustration above.
- Repeat to cut TWO body pieces and ONE base piece from the lining fabric. For each bag, you should end up with two pieces for the exterior, two pieces for the lining and two pieces for the base.
- Use the base pattern to cut ONE from the batting.
At Your Sewing Machine & Ironing Board
Create the upper bag
- Place the two exterior pieces right sides together and pin along both short sides. Repeat to pin the two lining pieces right sides together.
- Using a ½" seam allowance, stitch each short seam (four seams total).
- Turn the sewn lining right side out but keep the sewn exterior wrong side out. Slip the lining instead the exterior so the two layers are now right sides together. Align the side seams and the raw edges of straps. Pin up and around both curves and straps. The straps look like two long bunny ears above the main rectangle of the bag.
- Using a ½" seam allowance, stitch the entire curving seam, starting and stopping at a side seam. Go slowly, stopping with your needle in the down position as needed to adjust position as you move around each curve.
- Clip and trims all the curves, both the inner curves...
- ... and the outer curves.
NOTE: If you are new to sewing, this is a great project to practice keeping your seam allowances even. Check our our tutorial Sewing Smooth Curves Every Time for extra tips and techniques.
- Turn the bag right side out through the open bottom. Use a long, blunt end tool, like a knitting needle or chopstick to help round out the curves.
- Press the bag flat. Because you read our tutorial and did such a good job on your stitching and clipping, both the inner curves of the sides...
- ... and the outer curves of the top of the straps are both lovely.
Insert the base panel
- Pin the layers together along the raw bottom edge. You are not pining the open bottom closed; you are just pinning the lining layer to the exterior layer.
- Run a basting stitch around the entire bottom opening through both layers. Don't lock the seam at the beginning or end so this basting seam can also work as a gathering stitch. In this way, you can both keep the two layers secured for the final steps and can slightly gather the bag if need be to best fit against the flat base.
- Layer the three pieces that make up the base. Place the lining piece wrong side up and flat on your work surface. Place the batting on top of this piece. Place the exterior panel right side up on top. This creates a classic quilt-type sandwich with the fabric wrong sides together and the batting in between the layers.
- Baste around the entire base to hold the layers together. Keep your stitching close to the raw edges.
- Fold the base in half horizontally and vertically to find the center point of each side. Place a pin at each point.
- Similarly, find the center point of the open bottom of the bag. The side seams are two of the center points. Place these side seams together and flatten the bag. The outer folded edges are the opposite center points. Press to create a crease, and place a pin at each fold. Bring these pins together to double-check that, when flattened, the side seams are still exactly opposite one another.
- Turn the bag lining side out. Set the base into the bottom of the bag. The base should also be lining side out. Matching the center points, pin the base to the bag, right sides together.
- Match up each center point to start, then fill in all around, easing and gathering the top of the bag to fit the base.
- This is very similar to how you would insert a flat circle into a tube. If you're new to this technique, we have a full step-by-step tutorial on the process.
- Using a ½" seam allowance and starting at a side seam, stitch around the entire perimeter of the base.
- Inserting the base in this manner results in a visible seam allowance on the inside. No worries; you're going to cover it up!
- Cut a length of bias binding to fit around the entire base plus a couple inches for overlap.
- Wrap the binding over the seam allowance, encasing the raw edges to give the seam allowance a finished edge inside the bag.
- Leave 1" extra at the tail for an overlap. Pin in place all around. Don't be afraid to use plenty of pins.
- Fold back the tail of the binding and overlap the head for a clean finish, trimming away the excess binding as needed. Pin in place.
- Stitch the binding in place over the seam allowance. Remember, you are stitching only the seam allowance; don't stitch onto the main bag itself. Go slowly to insure you are catching both the front and back of the binding in the one seam.
- Turn the bag right side out and tie the straps together at the top with a cute little knot, adjusting for your best fit.
Project Design: Alicia Thommas
Sample Creation and Instructional Outline: Leah Wand