• PDF
  • Facebook
  • Instagram
  • Pinterest
  • Email
  • Print
Print Friendly, PDF & Email
  • PDF
  • Facebook
  • Instagram
  • Pinterest
  • Email
  • Print

Click to Read MoreHave you ever hit your side mirror driving your car into the garage? If so, you’re for-sure going to want a needle threader. It is the way for anyone without eagle vision to thread a needle.

Many sewing projects require a bit of hand sewing to finish up a job. Not every machine can sew on a button or do a hem stitch. So, first things first — let’s thread the needle.

Threading a Needle

Click to Enlarge

For Eagle Eyes

Click to Enlarge

  • Using sharp scissors, cut the thread at a 45-degree angle.

Click to Enlarge

  • Pass the freshly cut end through the eye of the needle. It’s easier if you slightly dampen the end of the thread first.
  • Pull the thread through the eye about 4 or 5 inches. This is the end that will remain unknotted.

For Everyone Else

Using a needle threader:

Click to Enlarge

  • Push the loop in the needle threader through the eye of your needle.

Click to Enlarge

  • Holding the needle and threader in one hand, pick up the thread and push it through the hole in the needle threader until it’s about 4 or 5 inches through the threader.
  • Gently pull the needle threader back through the eye of the needle.

There are also self-threading hand needles that have a slot into the eye of the needle. Some have slots on top and some on the side. You simply gently glide the thread to the notch next to the slot. It will catch and then you can snap the thread into the eye. Ta Da!

Helpful hints:

  • Additional light helps.
  • Beeswax can be used to stiffen the end of the thread and make it easer to poke through the eye.
  • Place a contrasting color behind your needle to make it easier to see.

Tying a Knot

It’s actually really easy, but you may need to practice a few times until you get the “feel” of it.

Click to Enlarge

  • Hold the thread between you thumb and index finger.

Click to Enlarge

  • Wrap a loop of thread completely around the tip of your opposite index finger (just at the base of your fingernail).
  • Close your thumb over the loop.

Click to Enlarge

  • Keeping the thread taut, use your thumb to roll the loop towards the end of your index finger.

Click to Enlarge

  • Just as it slides off, use your middle finger to step on the loop and hold while you pull the thread into a tight knot.

Click to Enlarge

Fabric designer, Heather Bailey, has a knifty “knot” tutorial that shows another way to tie a knot.

Subscribe
Notify of
guest

*Sew4Home reserves the right to restrict comments that don’t relate to the article, contain profanity, personal attacks or promote personal or other business. When commenting, your name will display but your email will not.

4 Comments
Newest
Oldest Most Voted
Inline Feedbacks
View all comments
Andrea Clark
Andrea Clark
1 year ago

I have trouble with the thread sliding out of the needle as I pull the thread through the fabric. I used to pinch with my middle finger but I’m trying to learn to use a thimble and that makes it impossible to pinch thread at the eye. Any tips???

Liz Johnson
Admin
Liz Johnson
1 year ago
Reply to  Andrea Clark

Hi Andrea – maybe try using a soft thimble. They are more flexible and your trick of pinching with your middle finger should still work. They are pretty easy to find and inexpensive — here’s an example: https://www.joann.com/dritz-soft-comfort-thimble-medium/14874283.html

Maria
Maria
2 years ago

been a long time since iv used hand sewing this article was very helpful.

Liz Johnson
Admin
Liz Johnson
2 years ago
Reply to  Maria

Hi Maria – Glad you found us to get some tips!

  FOLLOW US!
Translate »

You cannot copy content of this page

×

JOIN OUR NEWSLETTER

Enter your email address below to subscribe to the Sew4Home newsletter. Be the first to see new projects and patterns, helpful techniques, and new resources to enhance your sewing experience.

NO THANKS

We will never sell, rent or trade your personal information to third parties.