There's nothing quite like grabbing a delicious catnap in a swinging hammock to finish off sunny day. But this time of year, a regular blanket can be a bit too heavy. Why not whip up a summer-weight blanket in an incredibly soft sweatshirt knit? In fact, is there a certain someone you know who loves the nappin' life? Father's Day will be here soon, and a soothing, wrap-him-up blanket might be just the ticket. Our fast and easy project takes just a couple hours... he could be dozin' before you know it. We also show you how to make the personalized fabric tag shown in the bottom corner that tells Dad (or whomever is lucky enough to get the blanket) he's priceless.
This bold blanket is designed to match our Jumbo Lounge Pillow with the same wide strips and the same cute personalized fabric tag. Because, really... the full-on napping experience requires both a blankie and a pillow!
We used a preppy color palette of super-soft organic knits from Fabric.com. Not only are these exact colors available, there are other options from which to choose. Neutrals would be nice.
It finishes at approximately 56" x 84".
For great general tips and techniques, check out our handy Sewing with Knits tutorial.
Sewing Tools You Need
- Any Sewing Machine (we recommend the Janome Horizon Memory Craft 8900 QCP)
- Walking foot (the MC8900 QCP has the built-in AcuFeed Flex™ system, which we used - and love. If you do not have a built-in feeding system, we recommend a Walking foot or similar for working with the knit layers.)
- Twin needle (optional, but a time saver)
Fabric and Other Supplies
NOTE: The yardage listed below requires some precise cutting. If you are unsure are your cutting ability, bump the ¾ yard cuts to a full yard and the ½ yard cut to ¾ yard.
- ¾ yard of 58"+ wide sweatshirt weight knit fabric for two blanket stripes; we used 58" wide Organic Cotton Sweatshirt Fleece in Optic White (item #BW-303) from Fabric.com
- ¾ yard of 58"+ wide sweatshirt weight knit fabric for two blanket stripes ; we used 58" wide Organic Cotton Sweatshirt Fleece in Navy (item #BW-313) from Fabric.com
- ½ yard of 58"+ wide sweatshirt weight knit fabric for one blanket stripe; we used 58" wide Organic Cotton Sweatshirt Fleece in Poinsettia Red (item #DH-263) from Fabric.com
- ¾ yard of 58"+ wide sweatshirt weight knit fabric for one blanket stripe; we used 58" wide Organic Cotton Sweatshirt Fleece in Teal (item #BW-308) from Fabric.com
- All-purpose sewing thread in a contrasting color for regular stitching and topstitching; we used off-white
- Scissors or rotary cutter and mat
- See-through ruler
- Straight pins
- Seam gauge
- Seam ripper
- Iron and ironing board
Supplies for the optional personalized label
- Rubber Stamp of your choice; we used Inkadinkado Rubber Stamp With Wood Handle - Inspirations
- Inkpad suitable for fabric; we used Tsukineko Full-Size VersaCaraft Fabric and Home Decor Crafting Pigment Inkpad, Real Black
- Scrap of muslin or similar for the personalized label; the finished square is just 3" x 3"
The cuts below follow our design shown above and so we call out the fabric by color name.
- From the WHITE knit fabric (Organic Cotton Sweatshirt Knit in Optic White in our sample), cut TWO 13" x WOF (Width of Fabric) panels.
- From the NAVY knit fabric (Organic Cotton Sweatshirt Knit in Navy in our sample), cut the following:
ONE 13" x WOF panel
ONE 13½" x WOF panel
- From the RED knit fabric (Organic Cotton Sweatshirt Knit in Poinsettia Red in our sample), cut ONE 13½" x WOF panel.
- From the TEAL knit fabric (Organic Cotton Sweatshirt Knit in Teal in our sample), cut ONE 25" x WOF panel.
At Your Sewing Machine & Ironing Board
NOTE: As mentioned above, we used the built-in AcuFeed Flex™ system on our Janome MC8900 QCP with the optional narrow foot VD throughout the entire project. If you don't have a built-in feeding system, attach a Walking foot or similar. It helps keep the knit layers feeding more smoothly.
- With knits, sometimes your width of fabric cuts may vary slightly. So, find the narrowest of your six panels. Trim the selvedge from this panel, then trim the remaining five panels to exactly match. By taking the extra time to make sure all your panels are an exact match, you'll have a much easier time with your flat felled seams and hemming.
- Fold each panel in half to find its center point and mark this point with a pin. This gives you another reference point for accurate matching with the stretchy knit.
- The two 13½" panels are the end panels, the top and the bottom.
- Working from top to bottom, and following our diagram above, pin the first panel (red) to the second panel (white), matching the center pin points and the raw edges.
- Stitch together, using a ½" seam allowance, taking care not to stretch the knit as you sew. As we mentioned above, a walking foot helps to minimize the stretch. For more general tips and techniques, check out our handy Sewing with Knits tutorial.
- Once the seam is sewn, create a flat felled seam, trimming away the color on which you want the topstitching to show (we ran the topstitching within the darker color, avoiding the white since our topstitching thread color was an off-white).
- The knit naturally curls toward the right side; in this case, that helps the fabric to roll in the proper direction to create the flat felled seam.
- Press well with steam.
- Topstitch from the wrong side of the blanket.
- Stitching on the wrong side means you will be stitching within the opposite color from what will show on the front. In our sample, for this first set of panels, that meant we stitched in the white panel from the wrong side so it showed up in the red panel from the front.
NOTE: If you are new to the flat felled seam technique, we have a detailed tutorial here. By using a flat felled seam, your blanket is soft and smooth on both sides.
- Continue in this same manner from top to bottom
- Pin the third panel (navy) to the remaining raw edge of the second panel (white). Stitch together, creating a flat felled seam.
- Pin the extra-wide fourth panel (teal) to the remaining raw edge of the third panel (navy). Stitch together, creating a flat felled seam.
- Pin the fifth panel (white) to the remaining raw edge of the fourth panel (teal). Stitch together, creating a flat felled seam.
- Pin the sixth panel (navy 13½") to the remaining raw edge of the fifth panel (white). Stitch together, creating a flat felled seam.
- Because the knit doesn't ravel, we used a single fold hem and saved ourselves a little time with a twin needle.
- Fold the side edges to the back ⅝" and pin in place.
- Insert a twin needle. We used the off-white topstitching thread in both needles. The inner needle should be ½" in from the folded edge.
- Working on the right side of the blanket, topstitch down both sides.
- Repeat to create the top and bottom hems, creating a pretty square in each corner (see the close-up photo below).
NOTE: If you do not have a twin needle, simply stitch one seam ½" from the folded edge, then stitch a second seam ⅛" from the first.
Preparing the optional personalized label
- Pre-wash your fabric (no fabric softener) to remove any sizing. Cut or tear the fabric into the finished size you want. It should be large enough to leave room for sewing around the actual image area. We used a 3" x 3" square. Press your fabric nice and flat to insure the best possible ink coverage.
- Ink your stamp by tapping it lightly a number of times on the ink pad. Don't push hard into the ink pad or you won't end up with a crisp print. Look at the stamp to be certain you have good coverage. Test your impression on a fabric scrap.
- Stamp your fabric, keeping the pressure firm and even. Don't press super hard or your stamp may smear. Your practicing above should give you an idea of the required pressure. Gently pull your stamp off the fabric. Create as many patches as you want. Let the ink dry.
- Heat set by pressing between a pressing cloth, we used a paper towel below and on top. Press on high heat with a dry iron, holding your iron in place for a couple of 30-second sessions.
- You can wash and dry stamped images, but let the ink cure for several days before laundering.
Attach the optional personalized label
- Place the finished blanket right side up and flat on your work surface.
- Position the label in the bottom right corner, approximately ⅜" in from the inner hem seam lines along the side and bottom edges. Pin in place.
- Re-thread the machine with the second contrasting thread (we used red).
- Stitch in place with a decorative stitch square. We used a cross stitch pattern.
Project Design: Alicia Thommas
Sample Creation and Instructional Outline: Michele Mishler