RenRib_Feb17_Leaderboard

Facebook Twitter Sew4Home RSS Feed Follow Me on Pinterest Instagram

Sew4Home

Pin, Cut, Sew Pillow Trio

Printer-friendly versionSend by emailPDF version

Proudly display your favorite hobby with our set of clever appliquéd pillows. They break down the craft into three easy steps: Pin, Cut, Sew! Gee... maybe our instructions are way too detailed! 

We chose a soft faux suede for the main fabric; it's a great surface for appliqué. Ours is Passion Suede from Fabric Depot, which comes in a wide variety of rich colors. We recommend using the same fabric for all three pillows so the attention is drawn to the appliquéd words. 

The Pin, Cut, and Sew appliqués are a standard quilting cotton in a small print. We used the bright primary colors of Pezzy Beans by American Jane for Moda Fabrics. This is an older collection we had in our stash, and is no longer readily available in-store or online. However, any small, repetitive motif would work well. You want something that will show up well within the letter shapes.

Using the same print in three colorways gives our pillow trio great continuity, but you could mix and match motifs from different collections. Just be aware you don't want to get too busy with pattern and/or colors or the words won't be as instantly recognizable.  

Change out the appliqué thread to match each print, as we did, or pick a single color that coordinates with all three.

We offer a PDF download below for each word, but of course, you could create your own templates in the font of your choice. There are lots of free font options online. You could even change the words. 

We provide a nice step-by-step appliqué summary below, but if you're brand new to this technique, you may want to check out our full tutorial on How to Appliqué like a Pro.

Make this set for yourself, and one for your favorite sewing pal. They help remind us all to keep things simple. After all... it's just: Pin, Cut, and Sew

Our pillows finish at (and our templates are sized for) 16" x 16".

Sewing Tools You Need

Fabric and Other Supplies

Supplies shown are for THREE pillows

  • 1½ yards of 54"+ wide faux suede or similar in a solid color for the pillow fronts and backs; we used Passion Suede in Cream from Fabric Depot
  • ¼ yard EACH of THREE coordinating 44"+ wide quilting weight fabrics for the appliqué; we dove into our stash for three cuts of Pezzy Beans by American Jane for Moda Fabrics, this is an older collection that isn't readily available, but as mentioned above, any small print could work well. 
  • 3½ yards of 20"+ lightweight fusible interfacing; we used Pellon ShirTailor
  • THREE 16" x 16" pillow forms; we used Soft Touch 16" x 16" pillow forms by Fairfield
  • ¼ yard of fusible web for appliqué; we used Pellon Wonder Under
  • All purpose thread to match main fabric, and to highlight the three appliqué fabrics; we used cream for the pillow constructions plus green, black, and red for the appliqué
  • Bobbin thread
  • See-through ruler
  • Fabric pen or pencil
  • Seam gauge
  • Seam ripper
  • Scissors or rotary cutter and mat
  • Iron and ironing board
  • Straight pins

Getting Started

  1. Download and print the Pin, Cut, and Sew appliqué patterns.
    IMPORTANT: Each pattern is ONE 8½" x 11" sheet. You must print the entire PDF file at 100%. DO NOT SCALE to fit the page. There is a guide line on each page so you can confirm your final printout is to scale.
  2. From the main fabric for the pillow front and back (Cream Passion Suede in our sample), cut the following:
    THREE 17" x 17" squares for the pillow fronts
    THREE 17" x 12" rectangles for the pillow back overlaps
    THREE 17" x 11" rectangles for the pillow back underlaps
  3. From the lightweight fusible, cut the following:
    THREE 17" x 17" squares for the pillow fronts
    THREE 17" x 12" rectangles for the pillow back overlaps
    THREE 17" x 11" rectangles for the pillow back underlaps

At You Sewing Machine & Ironing Board

NOTE: Our instructions show construction of the "Pin" pillow; the steps would be exactly the same for the other two pillows with just the changes in the appliqué template and thread color.

Fusing

  1. Place the appropriately sized interfacing panel on the wrong side of each exterior fabric panel. All edges should be flush. Following manufacturer's instructions, and using a pressing cloth, fuse the interfacing in place.

Appliqué

NOTE: If you are brand new to appliqué, check out our full tutorial: How to Appliqué Like a Pro.

  1. Place the appliqué design template right side up on your work surface. 
  2. Cut a piece of fusible web. Place it over the design template, fusible side up. 
  3. Trace the word on the the fusible web.
  4. Trim around the word so it's a manageable size.
  5. Following manufacturer's instructions, adhere the fusible web to the wrong side of the appropriate accent fabric. 
  6. When you place the word fusible side down, it will now read backwards. This is just what you want in order for the word to read correctly from the right side of the fabric. 
  7. Carefully cut out the design. There are a lot of twists and turns when you are working with letters. Go slowly. The first letter is separate, as it the "dot" of the i, and the body of the i and the n are one unit. Cut and separate your elements.
  8. Carefully peel away the paper backing from all the letters.
  9. Use your cutting mat grid and/or the original printed template to confirm the placement and spacing of the letters.
  10. Find one of the pillow front squares. Place it right side up on your work surface. Place the word at the pillow's center. We used our see-through ruler in combination with a tape measure to double check our center points. The center of each word should be determined using that word's tallest letter. The bottom line of of the letters should be about 6¼" up from bottom raw edge of the fabric square.
  11. Don't forget to check side to side as well. These letters should be about 4½" in from each raw side edge. We say "about" because each word will be slightly different based on its letters, but all three should be centered.

    NOTE:
    The tackiness of the fusible web should grip onto the suede without slipping, but to be extra sure, you can lightly pin the letters in place, just make sure to remove the pins prior to pressing. 
  12. Take the pillow front to the ironing board.
  13. Following manufacturer's instructions, and using a pressing cloth or fabric scrap, fuse the appliqué to the pillow front.  
  14. Thread the machine with the appropriate appliqué thread color in the top and bobbin thread in the bobbin. 
  15. Select a zig zag stitch and adjust for a small stitch (we used 3.0 mm width, 0.9 mm length). 
  16. Position the appliqué under the foot so the right swing of the needle is off the edge of the fabric and the left swing of the needle is into the appliqué. 
  17. Stitch around the appliqué. This first round of stitching creates a smooth edge for the final stitches that follow. Letters have lots of twists and turns. Go slowly, pivoting as needed (with the needle down and the swing to the right - into the base fabric).
  18. Stitch all the way around again. The second round of zig zag is the finishing satin stitch. Set the machine for a tighter stitch (we used 3.0 mm width, 0.35 mm length). 
  19. We stitched the combined letters first, then the capital letter, and then the dot of the i letter.
  20. Repeat to appliqué the other two words in place on the remaining pillow fronts. 

Create the pillow back panels

  1. Find the 17" x 11" panels for the pillow backs. On each, press in a ½" double hem along one long side of each panel. To do this, fold back one 17" edge of each panel ½" and press. Then fold back an additional ½" and press again. Pin in place.
  2. Edgestitch the hem in place, staying close to the inner fold. 
  3. Repeat with the 17" x 12" panels, but with a wider hem. Fold back one 17" edge of each panel ½" and press. Then fold back an additional 2" and press again. Pin in place. Edgestitch in place close to the inner fold.

Layer front to back to finish

  1. Place the pillow top right side up on your work surface. Place the panel with the wider hem right side down on the pillow top, aligning the raw edges. Pin in place.
  2. Place the panel with the narrow hem right side down overlapping the first panel to create a perfect fit to the 16" x 16" square. Pin in place. 
  3. Stitch around the entire perimeter of the pillow cover, using a ½" seam allowance.
  4. Trim the corners, and finger press the seam allowances open. 
  5. Turn right side out.
  6. Insert your pillow form through the envelope opening and fluff it out into the corners.

Contributors

Project Design: Alicia Thommas
Sample Creation and Instructional Outline: Debbie Guild

Section: 

Comments (4)

Pat Pfeiffer said:
Pat Pfeiffer's picture

When I first saw these I said to myself " Pattern Weights!".I think I will make up a few about 3" square, paint the words on with fabric paint, and fill them with ground walnut shells or bb's. They are cute, and in miniature they would be useful for me. In full size they would just aggravate my anti-pillow husband. ( Some men often lack an appreciation of home dec!)

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ Pat - what a fun idea! Thanks for sharing it. If you do Instagram, post a pic to Sew4Home_diy when you get them done. 

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ Sue - Great! They are a fun trio to create.

Add new comment

*Sew4Home reserves the right to restrict comments that don’t relate to the article, contain profanity, personal attacks or promote personal or other business.
By submitting this form, you accept the Mollom privacy policy.