Thanks to our friends at Moda for providing the Central Park Collection by Kate Spain, which is due in stores and at online retailers this month. We are noodlin' on other projects for this lovely fabric.
Sewing Tools You Need3
- Any Sewing Machine (we recommend the Janome 2160DC)
Fabric and Other Supplies
- Fabric scraps that look good together. They can be from mixed collections – whatever looks good to you. Don't be afraid to try some unlikely mixes or even texture. As mentioned above, for our pillow, we used bits and pieces from Central Park by Kate Spain for Moda.
- 16" x 16" pillow form
- One 1-1/8"covered button kit (most kits come with 2 or more buttons, you'll need 2)
- See-through ruler
- Iron and ironing board
- Rotary cutter and cutting mat or scissors
- Straight pins
- Grid: the grid below shows finished measurements for a 16" pillow (you can scale the grid, using your very own math skills, to fit any size square pillow). See Getting Started below for actual cut sizes based on our 16" x 16" grid.
- Following the grid, figure out how you'd like to place your 22 pieces of fabric (11 on the front and 11 on the back - they can be the same front to back, 22 different pieces, or a few repeats as we did).
- From your scraps, cut 22 pieces in the following sizes. If you are using fabric with a directional print, think about the direction in both cutting and placing the piece so you don't have a sad little upside down piece somewhere.
- Cut EIGHT 4½” x 8½” rectangles (these are the top and bottom pieces)
- Cut FOUR 4½” x 4½” squares (the squares to the right and left of the center)
- Cut TWO 8½” x 8½” squares (these are the center pieces)
- Cut EIGHT 4½” x 2½” rectangles (the small fill-in pieces to the right and left of the center)
At Your Sewing Machine & Ironing Board
- This pillow is easy to patchwork if you follow the what-seam-to-sew-first guide in the photo above.
- Use a ¼" seam allowance for all your seams. You'll end up with three panels of patchwork you can then easily join with straight ¼" seams as shown.
- Repeat the process for the opposite side.
- Place the finished pillow front and pillow back squares right sides together, then turn one of the squares so its grid is 90º – follow the grid diagram above.
- Retaining that 90˚ turn you just completed, pin the front and back together, leaving about a 6" opening along the side you consider to be the base of the pillow.
- Using a ½" seam allowance, stitch around all four sides of the pillow, remembering to pivot at all the corners and to leave that 6" opening along the base side. Backstitch to secure both sides of the opening.
- Clip corners and turn the pillow right side out.
- Using a blunt-end tool, like a large knitting needle or a chopstick, push out all the corners so they are nice and sharp.
- Press in the raw edges of the opening ½" so they are flush with the sewn seam.
- Squeeze the air from the pillow form and insert it into the pillow through the opening. Fluff it into place.
- Pin the opening closed, matching the pressed edges.
- Slip stitch the opening closed.
- Find the center point in the pillow where diagonal lines meet as shown below.
- Make covered buttons and sew onto the pillow. You can follow the package instructions or our Button Kit Covered Buttons tutorial.
Hints and Tips
When you select scraps, there really are no hard-and-fast rules. But if you are unsure, try finding scraps that have similar colors; or pick a few colors as a theme, such as turquoise, red and white; or stick to scraps from within a single fabric collection (as we did). Even mixing in a little texture can be interesting... just don't overdo.
Project Concept & Construction: Alicia Thommas
Other machines suitable for this project include the Bernina activa 210 and the Pfaff hobby 1122.