Waverly_Leaderboard_FabricCookies

Facebook Twitter Sew4Home RSS Feed Follow Me on Pinterest

Sew4Home

Before & After: Ladder Back Chair - Silent Cinema Seat Cushion

Printer-friendly versionSend by emailPDF version

Click to Enlarge

Day two. We now have a lovely new chair thanks to yesterday's Faux Antique Refinishing project. As a part of that process, we took off the old seat. Today, it's out with the old and in with the new as we build a new cushion and cover for the salvaged wooden seat platform. If you've never tried this before, I think you'll be pleasantly surprised how easy it is. Suddenly, many chairs in your house will need recovering!

Our thanks to Jenean Morrison and Free Spirit Fabrics for providing the beautiful Silent Cinema fabric for our seat cushion.

  1. To re-cap, here is my 'before' chair with its very sad and worn seat cushion.
    Click to Enlarge
  2. We simply removed the four screws holding the seat in place.
    Click to Enlarge
  3. And pulled the seat away from the chair. Don't lose track of those screws; you'll need them to put the chair back together.
    Click to Enlarge
  4. Our old covering was held in place with tiny upholstery tacks. A mini pry bar was perfect for popping these out. You could also use a flat head screwdriver, but the pry bar is better and safer. You can often find these in the impulse section at your local home improvement store's check out counter.
    Click to Enlarge
  5. Here are the three pieces that made up our old seat cushion. We'll keep the wooden seat platform, but will create a new cushion and covering.
    Click to Enlarge
  6. How much of everything you need will depend totally on the size and shape of your chair, and if you are doing more than one chair. I suggest taking your chair apart first so you can use the actual seat to determine the exact size and amount of foam, batting and fabric you need. For my chair, I used Fairfield's NuFoam in a 1" thickness, Kyoto lightweight bamboo batting, and Jenean Morrison's beautiful Silent Cinema fabric in Orange Sunrise. Free Spirit has produced a number of Jenean's designs in both quilting weight and home decor weight. For this project, we selected the heavier home décor weight. The paint swatch cards in the photo simply show I took the fabric with me to the paint store to get a good match for yesterday's refinishing project.
  7. I needed just ½ yard each of NuFoam, bamboo batting and Silent Cinema.
    Click to Enlarge
  8. Place the seat directly onto the NuFoam and trace around it with a marker.
    Click to Enlarge
  9. Cut out the cushion on the drawn line.
    Click to Enlarge
  10. Repeat to trace and cut the batting piece.
    Click to Enlarge
  11. Use your batting piece to
  12. Add approximately 2"- 3" all around the seat, which you will use for wrapping. Your final fabric cut will be a square or rectangle - not the shape of the seat.
    Click to Enlarge
  13. Layer the NuFoam and batting onto the wooden seat.
    Click to Enlarge
  14. Drape the fabric over the cushion/batting. Use your ruler to make sure your motif is centered.
    Click to Enlarge
  15. Once you have your fabric exactly where you want it, pin it in place so it won't shift when you do you final wrapping.
    Click to Enlarge
  16. Wrap one side to the back and tack it in place with the staple gun. (You could use upholstery tacks, but they are quite a bit harder to manipulate.) Your wrap should be snug and taut, but not so tight you distort the fabric or flatten the cushion.
    Click to Enlarge
  17. Wrap the opposite side and tack in place directly across from the first tack. Flip the cushion over and make sure your motif is still looking good and your edges are smooth.
    Click to Enlarge
  18. If all looks good, staple both sides in place. A staple about every inch is good.
    Click to Enlarge
    NOTE: If you think your motif has shifted, remove the two initial staple tacks and re-wrap. Take the time to be really sure everything looks good, because taking a bunch of staples out of old wood is not fun.
  19. Repeat to wrap the top edge of the seat and then the bottom edge.
    Click to Enlarge
  20. Finally, pull the fabric around each corner. This takes a little futzing, but is not hard. Gather the corner fabric and pull back against the wood; you want to be able to see the edge of the seat so you can work along it. Adjust the gathers as you pull until they are even.
    Click to Enlarge
  21. Staple the finished corner into place through all the layers. Go ahead and put in several staples; you want the corner to stay nice and neat.
    Click to Enlarge
  22. When all your stapling is finished, you will likely need to go back over each one and flatten it into place with a small hammer. As I mentioned above, old wood can be very tough, so your staple gun is unlikely to be able to push the staple all the way flat.
    Click to Enlarge
  23. Trim back any excess fabric at the corners and you are good to go.
    Click to Enlarge
  24. Remember those screws you kept track of? Find them now and screw the new cushion into place. It's a good idea to make a small slit or hole in your fabric at each screw hole. By doing this, driving the screws into place won't pull or distort your nice new cushion.
    Image

Section: 

Comments (11)

scifiblues said:
scifiblues's picture

Love this! Now I'm going to have to find an old chair to do over. Should be fun...

Rinchen said:
Rinchen's picture

Nate Berkus suggests using a shower curtain as fabric. Easy to clean.

yellowRoseTX said:
yellowRoseTX's picture
I can't tell you how many times I recovered vintage dining chairs similar to yours as my kids grew up; it is so easy and my favorite fabrics were tapestries; you chair turned out very nice
Marie S said:
Marie S's picture
Very clear and easy to follow instructions. I have been going to do my 4 dining chairs for ages - this will spur me on. Thanks
aleishaz said:
aleishaz's picture
these details will help the process be nice and smooth
aleishaz said:
aleishaz's picture
awesome detailed instructions, thanks for the pictures, i have attempted to do this before and these details will help make it a smoother, better process next time around!
K.Day said:
K.Day's picture
LOVE it! I'm getting ready to do this to four of my chairs so this is perfect timing! Love your tutorials! Thank you.
Penny OO said:
Penny OO's picture
Love it. I have done this several times. Very inexpensive way to spruce up the old dinning room set.
plnewhou said:
plnewhou's picture
This is such a nice and easy project, thanks for detailing out all of the steps. This turned out lovely!
gk said:
gk's picture
Never dreamed it could be so easy!! Thanks so much. I've bookmarked this for future projects. smilies/wink.gif

Add new comment

*Sew4Home reserves the right to restrict comments that don’t relate to the article, contain profanity, personal attacks or promote personal or other business.
By submitting this form, you accept the Mollom privacy policy.